Direct
Heat
Sealers
Dry
Ink Heat
Imprinters
Bag
Sealer
Tape Dispensers
and Tape
Double Impulse
and Right Angle
Sealers
Copyright © 2008 JWC.
All Rights Reserved.
HEATSEALERS.NET
TOLL FREE 
1-888-212-0860
1-800-323-2352
1-516-935-0860
FAX 1-516-935-0879
For Poly Bags and Reclosable Bags see our
ZIPBAG division at
ZIPBAGS.COM
AUTOMATIC TABLE TOP SEALERS
Designed for the continuous sealing of thermoplastic materials. Depending on the model of the sealer, material up to 24" wide and 15 mil thick can be sealed. The seal width ranges from 2 mm - 5 mm. Equipped with an electronic timer and an electromagnet. Operates on impulse sealing, and controlled by a plug-in transistorized circuit board. Once correct settings have been established, consistent seals will be maintained automatically.
TISA series comes in light blue color, available in 18" & 24" with a 2mm or 5 mm seal width.
| TISA-452, 18", 2mm, 600w TISA-455, 18", 5mm, 900w TISA-602, 24", 2mm, 800w TISA-605, 24", 5mm, 1200w |
 |
W series comes in ivory, available in 12", 18" & 24" with a 2.7 mm or5 mm seal width.
| W-300A, 12", 2.7mm, 400w W-305A, 12", 5mm, 600w W-450A, 18", 2.7mm, 600w W-455A, 18", 5mm, 800w W-600A, 24", 2.7mm, 800w W-605A, 24", 5mm, 1300w |
 |
Easy to operate. For Auto operation, set the control on Auto,
the sealing bars will have a continuous up (open) and down (close) movement.
The frequency of the movement can be set by the operator at his
convenience. Just insert the material to be sealed when bar opens and remove
when seal is done.
For Manual operation, set the control knob to Manual, insert the material
to be sealed between the two sealing bars. Press down the foot switch, and
release when seal is done. Sealer comes with an electric foot switch and
a work table.
